-
ATTWOOD Sahara automatic bilge pump 1100gph 12volt
CE certified, permanent-magnet motor, stainless steel shaft, watertight sealed electrical cables. Permanent lubricated bearings. Snap removal of pump from base. ModelS 1100 v12 Flow l/min – m 070 […]
-
ATTWOOD Sahara automatic bilge pump 1100gph 24volts
CE certified, permanent-magnet motor, stainless steel shaft, watertight sealed electrical cables. Permanent lubricated bearings. Snap removal of pump from base. ModelS 750 v24 Flow l/min – m 048 […]
-
ATTWOOD Sahara automatic bilge pump 500gph
ModelS 500 v12 Flow l/min – m 032 Flow l/min – m 122 Flow l/min – m 213 Current draw A1,5 D mm19
-
ATTWOOD Sahara automatic bilge pump 750gph 12volt
CE certified, permanent-magnet motor, stainless steel shaft, watertight sealed electrical cables. Permanent lubricated bearings. Snap removal of pump from base. ModelS 750 v12 Flow l/min – m 048 […]
-
ATTWOOD special fuel vent
Hose adaptor size 16 mm at 90° and vent fitted with valve to prevent water from getting into the hull completely; nylon body, polished stainless steel outer part, made in accordance […]
-
ATTWOOD Tsunami bilge pump
CE certified in compliance with Directive ISO 28846/28849. Product features: 1) Free-flowing water around motor housing keeps motor cooled. 2) Snap removal of pump body from […]
-
Automatic aerator pump for livewell
Independently powered pump with internal lithium battery rechargeable via USB cable included. Continuous or intermittent operation. Fitted with full-charge battery and operating pump warning lights.
-
Automatic bipolar battery switch$(general power remote control switch with separate coil feed)
For 2 battery banks. Connected under starter key, if power needs to be cut automatically (in this way the ignition key needs additional tripping) or simply with […]
-
Automatic boat inflator 12V,300mbar, 150 lt/min
Fast, reliable, powerful automatic pressure regulator. The 12V pump 90015 is the first inflator/deflator specially designed to inflate and deflate boats and other inflatable structures up […]
-
Automatic electronic switch for any bilge pump
Fast installation in any point of the bilge. Petrol-, oil- and diesel-resistant.
-
Automatic fuse with thermal protection
Fitted with clear silicone watertight cap. 14.733.05 A5 Application hole on the panel mm12 Body mm31×14,6×35 14.733.10 A10 Application hole on the panel mm12 Body mm31×14,6×35 […]
-
Automatic switch for bilge pumps
20-amp flow. Technopolymer body. Removable for cleaning. v 12/24 Max current draw A – 12V 20 Max current draw A – 24V 10 Activation level mm […]
-
Automatic unipolar battery switch$(general power remote control switch with separate coil feed)
Connected under starter key, if power needs to be cut automatically (in this way the ignition key needs additional tripping) or simply with an ON-OFF switch independent from […]
-
AutoTrim Tabs
Made of cross linked polyethylene, self adjusting. Special shape and ribbing, initially helps the hull to plane, increases, it aligns with the hull as speed increases, ensuring […]
-
Auxiliary outboard engine bracket for stern mounting, reduced fit model
Designed to provide a better immersion of the outboard foot; fitted with highly-resistant pad. Overhang mm 140 For outboard up to 15 HP or 40 kg […]
-
Auxiliary outboard engine brackets
Made of white anodized anticorodal; fitted with white anticorodal gliding tracks; polyurethane lacquered beech board, adjustable in 3 positions; lifting with rise engine locking system, sturdy and […]
-
Auxiliary outboard engine brackets MEGA
Made of stainless steel, very sturdy. For outboard up to 40 kg or 20 HP(2T)/ 8 HP(4T) Vertical excursion 290 mm Pad mm 265 height – 210 […]
-
Auxiliary outboard stowage bracket for pushpit mounting
Polyurethane coated marine plywood board. Stainless steel fork pipe. Fitted with two holes to adapt the brackets onto pulpit pipe diameter size 30 and 25 mm. Board cm […]
-
B150 Medium Chirp, 300W
Airmar’s B150M delivers a great combination of shallow and mid-depth performance. Operating at a frequency range of 95 to 155 kHz, this transducer reveals fish in shallow […]
-
B265 Low-High Chirp, 1kW, w/ FB
The B265LH transducer includes all these frequencies plus every other frequency in the high and low bandwidths. This powerhouse delivers excellent resolution, bottom discrimination, and bait […]
-
B265 Low-Medium Chirp, 1kW
The B265LM, Chirp-ready thru-hull is a perfect, mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This […]
-
B275 Low-High Wide, 1kW
Get more coverage under your boat with Airmar’s unique wide-beam, low and high-frequency, Chirp-ready B275LHW. The high band operates across a frequency range of 150 to […]
-
Balance gear
Made of polished stainless steel, suited for supporting gangways; supplied with 3 shackles on the 3 corners for fitting into the stern stay or into the halyard […]
-
Ballast Flex
Ballast Flex