-
8 pole terminal board, 14A, 100% watertight
Clear polycarbonate cover, salt water-resistant rubber body; ideal for bilge connections or for use in engine rooms.
-
ANL fuse holder, high performance
Made of nylon/fiberglass. Fitted with LED indicator for fuse state (it lights up when the fuse burns out) and upper slot for visual check 14.100.40 Description Single […]
-
ANL Gold Plated fuses
14.100.42 A50 14.100.44 A100 14.100.52 A130 14.100.46 A150 14.100.47 A200 14.100.48 A250 14.100.49 A300 14.100.53 A325 14.100.50 A400 14.100.51 A500
-
Blade fuse holder, waterproof
Semi built-in box with rubber seal, housings for 10 blade fuses, rear outlet, 6 spare fuses, LED light for burnt out fuses. V 12/24 No of […]
-
Bus-Bar electric terminal board
High insulating capacity plastic base; nickel-plated cooper support bar, stainless steel screws and nuts. Volt 12/48. 14.207.04 Shunt terminal mm – Power terminals mm 4×5 Base mm 107×22 A continuous capacity 100 Cover 14.208.04 14.207.05 Shunt terminal […]
-
Electrical cables terminals
Made of black plastic, fitted with clear protection cover; separators for accidental contacts, nichel plated brass terminals. 14.206.36 N. of terminals 6 A 15 mm 70×23 14.206.40 N. of terminals 10 A 15 mm 109×23 […]
-
Electrical cables terminals
Made of black plastic, fitted with clear protection cover; separators for accidental contacts, nichel plated brass terminals. 14.206.35 N. of terminals 4 A 15 mm 50×23 14.206.37 N. of […]
-
Electrical shunt boxes, watertight
14.240.01 Material Black plastic Input 3 (2 medium,1 small) Clamps 8 (4+4) mm 76x127x45 14.240.02 Material Black plastic Input 6 (2 small, 2 medium, 2 large) Clamps 16 (8+8) mm 140x100x53
-
Flexible plait for ground cables, made of tin-plated copper
Section mm2 10 Roll m 25
-
Fuse holder box with transparent snap cover, made of polycarbonate
Silver-plated phosphor bronze connections. It fit regular lamellar fuses. Admissible voltage: 12/24 volt. Total max amperage of the box: 100 Amps. Max amperage for each fuse: […]
-
Fuse holder box with warning lights
For standard lamellar fuses. Equipped with LED warning light for cut off fuse. 14.102.70 Fuse housing 4 Warning LED 4 Max capacity A 100 Max capacity for single fuse 30 […]
-
Fuse holder boxes
Fit for regular blade fuses (ATP – ATO – ATC). Equipped with control LED on each fuse. 12/24V voltage. 100A max total load. 20A max load […]
-
Fuse holder with warning LED, watertight model
High quality, for standard lamellar fuses. 2 x 110-mm cable capacity, 3-mm2 section. LED 1 Max capacity A 30
-
Fuse holder, built-in model
for glass fuses size mm 6×32
-
Fuse holder, watertight model
High quality thermal-rubber, for standard blade fuses. Fitted with 2 x 130-mm cables, section 4-mm2 section. 20-Amp max capacity.
-
Glass fuse holder box
For standard 6.3×32-mm fuses. Fitted with blown fuse LED light. Snap cover and table with self-adhesive symbol stickers. Fuse housing 6 mm 130x90x36
-
Ground plates
Made of porous bronze, designed for fuel tanks, essential for unloading static electricity that may occur during the re-fuelling, which may spark off into the fuel causing […]
-
Groundplate mass plate equipped with nuts and bolts
Made of porous bronze, essential to acquire an appropriate mass to install Loran, GPS, Navigators, radio-telephones SSB and to cut down radio interferences. 29.630.01 TypeStandard Equal to […]
-
Heavy Duty Bus-Bar Terminals
Made of nylon/fibreglass. The cables can feed through all four sides.
-
High-capacity fuse holder
Made of thermoplastic with removable clear cover. 14.100.41 Base mm 95×42 For fuses ANL 14.100.xx 14.099.41 Base mm 95×42 For fuses MEGA 14.099.xx
-
Insulating covers made of transparent plastic for Bus Bar
14.208.10 For 14.207.10 14.208.20 For 14.207.12 14.208.30 For 14.209.10 14.209.20
-
MEGA high-capacity standardized fuses
14.099.44 A 100 14.099.45 A 125 14.099.46 A 150 14.099.47 A 200 14.099.48 A 250 14.099.51 A 500
-
Plate made of galvanized copper
Type-approved size by RINA standards, size 2×20 mm, suitable for connections among them and to various ground cables. Bar size m 2,1
-
Power distribution fuse box for MEGA fuse
Thermoplastic box with lid to be used on the battery positive pole. To be matched with a MEGA fuse. mm 80x55x33(H)
1
2