-
Fuel Portable Tank with Filter
This Nuova Rade fuel tank with built-in vent and feed pipe with filter, certified by RINA, is made of HDPE and it’s equipped with an 8mm outlet with […]
-
Fuel tanks
Made of crosslinked polyethylene type-tested for petrol. Made in compliance with ISO 21487 standards, RINA CE type-tested. Equipped with 10/180 – 240/330 ohm universal frequency level indicators, already installed […]
-
Fuel tanks
Made of crosslinked polyethylene type-tested for petrol. Made in compliance with ISO 21487 standards, RINA CE type-tested. Equipped with 10/180 – 240/330 Ω universal frequency level indicators, already installed and […]
-
Fuel tanks
Made of stainless steel, complies with RINA and EC standards, includes snap-in cover with drain plug, hose adaptor, vent, made-ready for fuel level indicator using a standard international 5-hole […]
-
Fuel-Lock vent with trap to prevent water to flow back
Fuel-Lock lets air but not fuel out. Fuel is locked inside by a trap system that removes marine pollution and streaks on the side. An internal […]
-
Fuse
Max Power offers a range of calibrated fuses specifically selected model by model and tested to offer an increased level of protection over standard ANL fuses. Chosen taking into account each fuse’s specific blow curve, Max Power fuses match the requirements of each thruster system.
Code Description Model Voltage Amp 312882 Extraction handle CT35/45 | CT60 | CT80 / C. Retract | CT60 / CT80 / C. Retract | CT100 / VIP150 | CT125 / VIP150 | CT165 / 225 | CT300 / 325 12V | 24V 125 | 160 | 200 | 125 | 315 | 200 | 250 | 400 35017 Fuse holder CT35/45 | CT60 | CT80 / C. Retract | CT60 / CT80 / C. Retract | CT125 / VIP150 12V | 24V 35018 Fuse holder CT100 / VIP150 | CT165 / 225 | CT300 / 325 12V | 24V 315 | 250 | 400 35019 Fuse CT60 12V 160 35020 Fuse CT80 / C. Retract 12V 200 35021 Fuse CT35/45 12V 125 35022 Fuse CT100 / VIP150 12V 315 35027 Fuse CT165 / 225 24V 250 35028 Fuse CT300 / 325 24V 400 -
Fuse holder box with transparent snap cover, made of polycarbonate
Silver-plated phosphor bronze connections. It fit regular lamellar fuses. Admissible voltage: 12/24 volt. Total max amperage of the box: 100 Amps. Max amperage for each fuse: […]
-
Fuse holder box with warning lights
For standard lamellar fuses. Equipped with LED warning light for cut off fuse. 14.102.70 Fuse housing 4 Warning LED 4 Max capacity A 100 Max capacity for single fuse 30 […]
-
Fuse holder boxes
Fit for regular blade fuses (ATP – ATO – ATC). Equipped with control LED on each fuse. 12/24V voltage. 100A max total load. 20A max load […]
-
Fuse holder with warning LED, watertight model
High quality, for standard lamellar fuses. 2 x 110-mm cable capacity, 3-mm2 section. LED 1 Max capacity A 30
-
Fuse holder, built-in model
for glass fuses size mm 6×32
-
Fuse holder, watertight model
High quality thermal-rubber, for standard blade fuses. Fitted with 2 x 130-mm cables, section 4-mm2 section. 20-Amp max capacity.
-
G Fender
G Fender
-
G.08 steering helm
Reference: G.08 • Interchangeable with T.67 Ultraflex and SH8050 Teleflex • Packaged with 90° bezel kit • Made of corrosion resistant material • Made by a planetary […]
-
G.10 steering helm
Reference: G.10 • Interchangeable with T.67 Ultraflex and SH8050 Teleflex • Packaged with 90° bezel kit • Made of corrosion resistant material • Made by a planetary […]
-
G.12 steering helm
Reference: G.12 • Interchangeable with T.71 Ultraflex and SAFE-T Teleflex • Packaged with 90° bezel kit • Made of corrosion resistant material • Made by a planetary […]
-
Galvanised calibrated chain suitable for anchor winch
Galvanised calibrated chain available in 6mm, 7mm, 8mm, 10mm, 12mm
- Call us if you have any questions:
- (+356) 2157 0962
- (+356) 9980 8359
- infostuartmarine@gmail.com
