
BATTERY ISOLATORS 3X140AMP
December 10, 2023Coelmo DML740
December 10, 2023The OCEAN series battery chargers are designed to cover the heaviest load requirements, always maintaining high performance and total safety. This series of chargers turns out to be the natural evolution of the previous one and counts several innovations.
HERE THE MAIN CHARACTERISTICS:
– Charge of three-stage batteries
– Multiple outputs for multiple battery packs
– Differentiated charge depending on the type of battery (Electrolyte, Gel)
– High temperature control of the battery via temperature sensor (Optional)
– Possibility to use the battery charger as a power supply
– Automatic cooling controlled by the internal microprocessor
– Alarms on the time durations of the charging phases
PROTECTIONS
– Short circuit at the output.
– Internal overheating
– Overtemperature of the battery
– Input
overvoltage – Input overcurrent
| MAXIMUM OUTPUT CURRENT | 50A 24V |
| NUMBER OF OUTPUTS | 3 |
| INPUT VOLTAGE | 230V (-10%, + 15%) |
| FREQUENCY | 45 – 60Hz |
| CHARGING TENSION IN ABSORPTION | 27.6V per lead / 28.4V for gel |
| LOAD VOLTAGE IN FLOAT | 27.2V per lead / 27.4V per gel |
| MAXIMUM ABSORPTION 230 Vac | 8A |
| COOLING DOWN | Forced, with constant speed fan |
| DIMENSIONS (L x H x D) | 300 x 352 x 155mm |
| WEIGHT | 19.5 Kg |
Related products
-
Voltage Sensitive Relay
This relay charges two batteries at the same time with a single alternator. When the engine is switched on, the Voltage Sensitive Relay stays open until […]
-
DC to DC galvanic isolation converters
They reduce voltage from 24 to 12 volt and stabilize it. Galvanic isolation makes it possible to connect whatever device without power disruption and prevents inlet-outlet […]
-
VICTRON Centaur analogic battery chargers
3-stage IUOU charge automatic chargers, independent outlets to charge 3 banks at the same time – full power battery. Technical data: – Aluminium frame – Universal […]




