Hertz HTX 8 M-CL-W / C LED CLAMP TOWER 200watts
December 10, 2023Hertz HMR 10 D DIGITAL MEDIA RECEIVER
December 10, 2023The HMD8 DSP, powered by Hertz Marine DSP technology, rich new highs of listening pleasure during navigation. DSP user friendly PC-Software interface make the setup process a breeze, exploiting every single pills of performance from the installed speaker system. The amazing power of 8 * 85 W or 4 * 260 W (RMS@ 4Ω) gives the HMD 8DSP the capability to drive with authority the complete speaker system generating tons of crystal clear SPL up to 3 different zone of the vessel. “Power for the Waves” design philosophy features a sturdy enclosure made of extruded aluminum with an anti-corrosion treated PCB to ensure years of listening pleasure in open water.
Data table
DIGITAL SIGNAL PROCESSOR |
|
Filter type |
Full / High pass / Low pass / Band pass |
Filter model and slope |
Butterworth (6, 12, 18, 24, 30, 36, 42, 48, 54, 60 dB/oct) Linkwitz-Riley (12, 24, 36, 48, 60 dB/oct) Bessel (6, 12, 18, 24, 30, 36, 42, 48, 54, 60 dB/oct) Chebyshev (6, 12, 18, 24, 30, 36, 42, 48, 54, 60 dB/oct) QLP quasi-linear phase (6, 12 dB/oct) |
Crossover frequency |
20 Hz – 20000 Hz integer values |
Phase control |
0 ° – 180°, all pass equalizer poles |
Bass boost |
– |
Analog input equalizer |
– |
Output equalizer |
Graphic and Parametric modes n. 10 parametric poles (Peaking, High Shelf, Low Shelf, Notch, All pass) ±12 dB gain, variable Q (0.5 – 16.0) n. 10 graphic poles |
Time alignment distance |
0 – 510 cm (0 – 200.8 inches) |
Time alignment delay |
0 – 15 ms |
Time alignment step |
1 cm |
Time alignment fine set step |
1 sample |
Memories |
n. 2 memories n. 3 parametric poles for each memory (Peaking, High Shelf, Low Shelf) ±12 dB gain, variable Q (0.5 – 16.0) |
Preset |
Rotary switch for 7 installation presets |
AMPLIFIER STAGE |
|
Distortion – THD @ 1 kHz, 4Ω, 70% Rated Power |
0,06% |
Damping factor @ 1 kHz, 4Ω, 2 VRMS |
> 110 |
Bandwidth @ -1.5 dB |
10Hz ÷ 22kHz |
S/N ratio (A weighted @ 1 V Input) Master Input |
100 dBA |
S/N ratio (A weighted @ 1 V Input) Optical Input |
105 dBA |
Input sensitivity Pre-In |
0.6 ÷ 6 VRMS |
Input sensitivity Speaker-In |
2.2 ÷ 22 VRMS |
Minimum load impedance |
8Ch: 2Ω 4Ch – (Bridge 1/2; 3/4; 5/6; 7/8) : 4Ω |
OUTPUT POWER (RMS) @14.4 VDC, 1% THD: |
|
8Ch @ 4Ω |
85 W x 8 |
8Ch @ 2Ω |
130 W x 8 |
4Ch (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ω |
260 W x 4 |
Related products
-
Hertz HMD1 HIGH POWER MONO AMPLIFIER
HMD1 mono amplifier is the perfect solution to add one or more marine subwoofer to your vassel, being the ideal power extension of HMD8 DSP. At 1 […]
-
Hertz HCP 4M MARINE 4 CHANNELS AMPLIFIER
HCP 4M four channels marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, […]
-
Hertz HCP 5 MD 24V MARINE 5 CHANNELS 24V AMPLIFIER
HCP 5 MD 24V marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a […]