Trailer Plug Male, 7 pin, for 11887 plug
December 10, 2023
Isotherm CRUISE 36 INOX
December 10, 2023
Boat cover support system
The Boat Cover Support System will ideally extend the life of your boat and cover.
Easily installed and adjusted, it keeps water and debris from accumulating in the centre
of the cover.
The kit includes one telescopic aluminium pole (50cm to 116cm) that is positioned in the centre of your boat with a wide support on top and polypropylene webbing straps, which are hooked from bow to stern.
The Boat Cover Support System fits all covers for boats up to 7m.
Installation Instructions:
1. Position the strap centre point over the bow of the boat. The protective sleeves
should be positioned so that the strap does not come in contact with the front edges
of the boat.
2. Pull the straps evenly over the boat
3. Weave the straps through the triangular support piece in an ‘’under-over-under’’
pattern, so that the straps lay on top of the support.
4. Insert the pole into the triangular support piece and raise the pole to its highest
point. Twist the pole sections to loosen and to tighten.
5. Hook the ends of the straps on the boat trailer
6. Adjust the straps evenly so that they are tight and the pole stands upright
7. Carefully pull the boat cover over the straps, so as not to push over the pole. The
pole may need to be adjusted in height depending on the shape and size of your boat
and its cover.
Related products
-
Boat Cover ”Sea Cover”
Boat Cover, SeaCover is ideal to cover and protect your boat against rain, dust and sun when you don’t use it. It combines high manufacturing standards with high-quality materials. It is available in several sizes depending on […]
-
Console Cover Size
This console cover is provided in silver colour and in four different sizes. It is made of extra strong Polyester 420D with double stitched seams for […]
