
Pull switch
December 10, 2023
Ignition cut-off device (complying with regulations)
December 10, 2023Designed on purpose for the marine environment. In case of heavy overload (i.e.: short circuits), the circuit breaker disconnects instantaneously; for overloads up to 50% it maintains the contact for few seconds so, in case it is due to a chance event, it has time to return within the limits without interrupting the power supply. In case of short circuit, the switch cannot be reactivated until the problem is solved. – Toggle handle circuit breaker – Toggle actuator, IAG series, universal 12/220 V, front recess in the panel, 16-mm Ø. – Flat flush toggle circuit breaker for horizontal or vertical mounting – Flat actuator with flush toggle, coloured light indicator for OFF position. IEGB series, universal 12/220 V, front recess in the panel 32×19-mm.
Related products
-
CARLING SWITCH Contura II switch CARLING
Water-resistant IP 56; installation requires a rectangular hole size 21.5×36.8 mm; maximum capacity of 20 A at 12volt, 15 A at 24 volt. Fitted with two lights: one illuminates the user […]
-
Ignition cut-off device (complying with regulations)
Fitted with slip-off clip system, universal size, it can open and close the circuit depending on the terminals that are connected.
-
Watertight ignition key IP65
Fitted with removable key, which activates selected systems such as the bilge pump, water level or petrol level without powering the whole boat. Watertight seal by means of […]