Hertz HTX 8 M-CL-W / C LED CLAMP TOWER 200watts
December 10, 2023Hertz HMR 10 D DIGITAL MEDIA RECEIVER
December 10, 2023The HMD8 DSP, powered by Hertz Marine DSP technology, rich new highs of listening pleasure during navigation. DSP user friendly PC-Software interface make the setup process a breeze, exploiting every single pills of performance from the installed speaker system. The amazing power of 8 * 85 W or 4 * 260 W (RMS@ 4Ω) gives the HMD 8DSP the capability to drive with authority the complete speaker system generating tons of crystal clear SPL up to 3 different zone of the vessel. “Power for the Waves” design philosophy features a sturdy enclosure made of extruded aluminum with an anti-corrosion treated PCB to ensure years of listening pleasure in open water.
Data table
DIGITAL SIGNAL PROCESSOR |
|
Filter type |
Full / High pass / Low pass / Band pass |
Filter model and slope |
Butterworth (6, 12, 18, 24, 30, 36, 42, 48, 54, 60 dB/oct) Linkwitz-Riley (12, 24, 36, 48, 60 dB/oct) Bessel (6, 12, 18, 24, 30, 36, 42, 48, 54, 60 dB/oct) Chebyshev (6, 12, 18, 24, 30, 36, 42, 48, 54, 60 dB/oct) QLP quasi-linear phase (6, 12 dB/oct) |
Crossover frequency |
20 Hz – 20000 Hz integer values |
Phase control |
0 ° – 180°, all pass equalizer poles |
Bass boost |
– |
Analog input equalizer |
– |
Output equalizer |
Graphic and Parametric modes n. 10 parametric poles (Peaking, High Shelf, Low Shelf, Notch, All pass) ±12 dB gain, variable Q (0.5 – 16.0) n. 10 graphic poles |
Time alignment distance |
0 – 510 cm (0 – 200.8 inches) |
Time alignment delay |
0 – 15 ms |
Time alignment step |
1 cm |
Time alignment fine set step |
1 sample |
Memories |
n. 2 memories n. 3 parametric poles for each memory (Peaking, High Shelf, Low Shelf) ±12 dB gain, variable Q (0.5 – 16.0) |
Preset |
Rotary switch for 7 installation presets |
AMPLIFIER STAGE |
|
Distortion – THD @ 1 kHz, 4Ω, 70% Rated Power |
0,06% |
Damping factor @ 1 kHz, 4Ω, 2 VRMS |
> 110 |
Bandwidth @ -1.5 dB |
10Hz ÷ 22kHz |
S/N ratio (A weighted @ 1 V Input) Master Input |
100 dBA |
S/N ratio (A weighted @ 1 V Input) Optical Input |
105 dBA |
Input sensitivity Pre-In |
0.6 ÷ 6 VRMS |
Input sensitivity Speaker-In |
2.2 ÷ 22 VRMS |
Minimum load impedance |
8Ch: 2Ω 4Ch – (Bridge 1/2; 3/4; 5/6; 7/8) : 4Ω |
OUTPUT POWER (RMS) @14.4 VDC, 1% THD: |
|
8Ch @ 4Ω |
85 W x 8 |
8Ch @ 2Ω |
130 W x 8 |
4Ch (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ω |
260 W x 4 |
Related products
-
Hertz HCP 4M MARINE 4 CHANNELS AMPLIFIER
HCP 4M four channels marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, […]
-
Hertz HCP 5 MD 24V MARINE 5 CHANNELS 24V AMPLIFIER
HCP 5 MD 24V marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a […]
-
Hertz HCP 2MX MARINE STEREO AMPLIFIER
HCP 2 MX marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a […]