Pair of Sport series trim tabs for hulls exceeding 40-knot speed
December 10, 2023
LENCO Heavy Duty Performance (HD) trim tab kit
December 10, 2023
LENCO AutoglideTM automatic trim tab control device
This device automatically adjusts your trim tabs via a built-in GPS system + 3 gyroscopes + 3 accelerometers depending on the sea conditions. Three working modes: 1) Drive in harbour: it prevents or minimizes the movement of flaps. 2) Gliding: it lowers the tabs while gliding and then retracts them when the boat has reached its trim. 3) Navigation: it automatically adjusts the flaps depending on the rolling and pitching angles, keeping the boat in its best trim according to sea conditions. It can also save 2 manually-set trims. Version A: supplied with GPS receiver/antenna and NMEA 2000 Network. Version B: supplied without receiver/antenna and NMEA 2000 Network. It can be connected to an existing GPS antenna and NMEA 2000 network.
Related products
-
Nmea 2000 trim tab position indicator
This kit allows the trim tab position to be displayed on RAYMARINE monitors (series A; C; E; G). The connection is possible between the red+green cables […]
-
Pair of Sport series trim tabs for hulls exceeding 40-knot speed
Boxed version with no overhanging parts, can be used with electro-mechanic kit EM 51.350.00 (only standard series 51.634.01) or with Bennet kits. 51.634.01 Twin trim tabs cm30×30 […]
-
Bennet Hydraulic Power Unit (Pump)
A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to […]
