Stern light pair, built-in model
December 10, 2023
Standard series trim tabs, depth of 230 mm
December 10, 2023
BENNETT Auto Tab Control
Computerized mechanism developed by Bennett. It stabilizes the boat with an automatic trimming system. The system checks the boat plane angle 650 times per second and adjusts it if required. The standard plane angle is recorded in the ATC processor and can be adjusted if necessary by operating on the control panel. The system is made up of 3 parts: 1) control panel KEYPAD 2) intelligent module with ATC microprocessor 3) connection relay between ATC and hydraulic power unit
Related products
-
BENNETT spare parts
51.238.12 DescriptionBennet spare system 12 V 51.238.24 DescriptionBennet spare system 24 V 51.232.01 DescriptionSpare solenoid valve for Bennet system red wire 12 V 51.232.02 DescriptionSpare solenoid […]
-
Electro-mechanical trim tab actuator system EM
No hydraulic circuit, the whole mechanism is fitted into a nylon fiberglass cylinder; a small electric motor moves a series of gears to actuate the lapped stainless steelpiston; easy, […]
-
Pair of Sport series trim tabs for hulls exceeding 40-knot speed
Boxed version with no overhanging parts, can be used with electro-mechanic kit EM 51.350.00 (only standard series 51.634.01) or with Bennet kits. 51.634.01 Twin trim tabs cm30×30 […]
