Pull switch
December 10, 2023Ignition cut-off device (complying with regulations)
December 10, 2023IP56 watertight. A 21.5×36.8-mm rectangular hole is required for installation. 20 A/12 V and 10 A/24 V max capacity. Fitted with double LED, one for the use symbol (always on) and one for the switch activation.
Description 12/24 V switch with no toggle
Version unipolar
Type ON – OFF
Use Any
N. of terminals 3
Description 12/24 V switch with no toggle
Version unipolar
Type (ON) – OFF
Use Horn, WC control, etc.
N. of terminals 3
Description 12/24 V switch with no toggle
Version unipolar
Type ON – OFF – ON
Use 2 separate circuits, navigation lights, bilge pumps, etc.
N. of terminals 4
Description 12/24 V switch with no toggle
Version unipolar
Type (ON) – OFF – (ON)
Use Hydraulic gangways, flaps, electric ladders and tops, winch
N. of terminals 4
Description 12/24 V switch with no toggle
Version unipolar
Type (ON) – OFF – ON
Use (Automatic/manual) bilge pumps
N. of terminals 4
Description 12/24 V switch with no toggle
Version Bipolar
Type (ON) – OFF – (ON)
Use Hydraulic gangways, flaps, electric tops, winch
N. of terminals 7
Description 12/24 V switch with no toggle
Version Bipolar
Type ON1 – OFF – ON1+2
Use ON1 = circuit 1 ON1+2 = circuit 1+2 Navigation lights for hulls up to 12 m: ON1 = white 360° ON1+2 = white 360°+red/green 112.5°
N. of terminals 7
Related products
-
Ignition cut-off device (complying with regulations)
Fitted with slip-off clip system, universal size, it can open and close the circuit depending on the terminals that are connected.
-
AIRPAX/SENSATA toggle handle hydraulic magnetic circuit breaker with rechargeable automatic fuse
No need of fuses. Designed to stand overloads of up to 50% for a few seconds. They immediately disconnect in case of short circuit and cannot […]
-
Toggle switch
14.925.01 Type ON-OFF Neck Ø mm 12 A 15 N. of terminals 2 Rubber cap with OPTIONAL brass washer 14.925.03 14.925.02 Type ON-OFF-ON Neck Ø mm 12 A 15 N. of terminals 3 Rubber cap […]