Selecta New battery switch

Can use batteries alternatively or simultaneously; fitted with copper contacts, stainless steelsprings, PC/PTB/Fiberglass flame resistant casing, protective cable base; extra ring-nut for flush mounting (Ø size 95 mm); type approved by ISO 8846 MARINE EN 28846. . A) “MK II” version. selectable options: bank/battery “1”, bank/battery “2” or 1+2 simultaneously. Includes device that disconnects the alternator power automatically if is under the “OFF” position without switching off the engines; type-approval no. DIP006907SP. B) Version MK III. connects the engine start-up batteries and the service batteries simultaneously in position “1”, keeping the start-up batteries separately with motors, thus minimizing the risk of an accidental discharge if case of an emergency. The two circuits are connected among them under position “2”, type-approval no. DIP006907SP

 14.921.00

Model MK II

Max capacity – intermittent 450 A

Max capacity – in continuous 300 A

Functions 1 – Battery 1; 2 – battery 2; 3 – parallel

Pick up 1500°

Base mm 104×104

Height mm 80

Pins mm 10

 14.921.02

Model MK III

Max capacity – intermittent 450 A

Max capacity – in continuous 300 A

Functions 1 – Connect services and motors with separate circuits 2 – Parallel between services and motors

Pick up 1500°

Base mm 104×104

Height mm 80

Pins mm 10